- 1 How do I fix the OPC on my Sharp TV?
- 2 What does it mean when the OPC light on a Sharp TV?
- 3 What is the OPC on TV?
- 4 Why is my Sharp TV power light and OPC light blinking?
- 5 How do you reset a black screen on a Sharp TV?
- 6 What to do when your TV turns on but the screen is black?
- 7 How long do sharp TVs last?
How do I fix the OPC on my Sharp TV?
Simultaneously press and hold the “input” and “channel down” buttons on the remote. Plug the TV back into power and wait for the television start while you hold down these buttons. Select “Service Mode” from the menu and then select “Factory Reset” to restore the original settings.
What does it mean when the OPC light on a Sharp TV?
The Optical Picture Control technology on a Sharp Aquos TV automatically adjusts the brightness of the screen. When you have the OPC turned on, the OPC LED turns green. A flashing OPC LED is an alert that something is wrong with your Aquos television.
What is the OPC on TV?
Understanding TV OPC (Optical Picture Control) Feature Depending on your TV unit, you’ll have an OPC LED light at the bottom. This light works to adjust the brightness of the screen based on the lighting in your room. However, when the OPC LED blinks, it could indicate an error that needs to be checked out.
The blinking of either the power light or the OPC (Optical Picture Control) light is an error message or fault code. It is not easy to tell what is causing the error. It may be a setting on the television, it might be a problem with the firmware or a mechanical issue that requires service.
How do you reset a black screen on a Sharp TV?
As a last resort, you can perform a hard reset if your TV is not working. To do this, unplug the Sharp TV and then press and hold the power button for 30 seconds. Depending on your TV model, you may also need to press or hold some of the volume buttons, so be sure to check your manual.
What to do when your TV turns on but the screen is black?
Replace the HDMI cable as it may have a short or another defect which causes the black screen issue. Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues. Factory reset of the TV to resolve the issue.
How long do sharp TVs last?
A Sharp TV would typically last for five to seven years. However, its lifespan could increase to ten years depending on the frequency of use and how well-kept it is.