PS4 controller does not charge or turn on: tricks and how to fix it

Here are some tricks that we recommend you try if you have battery problems. If your battery is draining very fast or not charging at all, take a look at these tips and you might find the answer.

Check PS4 controller settings

The first trick, and the most important, is to review and configure the settings well. It consists of having a correct configuration of our PlayStation 4 controller. The first thing we have to do is enter PS mode, go to sound settings and then lower or disable the following options:

• Lower the brightness of the dualshock 4
• Disable the volume and vibration of the PlayStation controller
• Configure the automatic shutdown mode of the PS4

Once this is done, we are going to see how the battery life of our dualshock will increase up to 80% during our games and games.

Check the status of the Dualshock 4 cable

It consists of checking the charging cable of our command well. Many PlayStation 4 controller battery failure They are caused by the poor condition of our USB cable.

To do this, what we have to do is change the cable and check that it does not work with another. If it works with another cable, then we’ve figured out what the charging problem was!

In addition, another recommendation is that we do not get used to charging our Dualshock 4 with a cable. That is, there are many PlayStation 4 controller charging docks cheap that can help the charging plug of our dualshock 4 not be damaged or that our charging cables are not damaged so much by being bent.

Check the USB inputs

In this case, we have to check that the charging problem is not being caused by the USB ports of our game console.

In order to verify this, we simply have to take a mobile phone charger and try to charge our PlayStation 4 controller. If by doing this little advice we see that our PS4 controller does charge, we can confirm that the problem is in the USB ports of our console and that, in that case, it is best to send it to be repaired.

Reset the PlayStation 4 controller

Although you may not know it, all Ps4 controllers have a reset or restore button or hole. To do this, we simply turn our ps4 controller over and find a small hole.

What we have to do is introduce a needle or a small screwdriver for a few seconds and… that’s it! Your controller should start working like new again.

Call Sony to fix your PS4 controller

One of the things we never do is call Sony’s customer service line. Sony makes a customer service phone available to everyone to make any kind of query.

Therefore, access the PlayStation contact form and chat here and tell them about your problems with the PS4 controller.

Change your PS4 controller for a new one

If you have reached this point and you have not managed to fix your PS4 controller, the solution is to change your PS4 controller for a new one. There are cheaper options on the market if you don’t want to spend money on a brand new original remote.

Now we are going to explain step by step how to fix PS4 controller not charging. It is one of the most frequent problems, but it also has a solution, which we are going to offer you in this article. Therefore, pay attention to all the practical suggestions we have for you.

At certain times, you will have to solve how to fix ps4 controller that doesn’t load. And in some cases, the remote does not even turn on, presenting different problems in the battery. Fortunately, many of the faults are easy to fix, without the need to spend a lot of money.

The remote does not turn on

One of the drawbacks is that the remote does not turn on, or in any case, it does not pair with the console. To solve the problem, you must turn off the console, as well as the router, and wait several minutes. Now, when turning on the console, keep the router off.

If now he dual shock 4 works correctly, it is because the wifi signal causes interference. Just change everything in position and with that the error should be solved.

The computer does not recognize the controller

Apart from how to fix ps4 controller what does not load on the console, it can also be a problem on the computer. It is possible to adapt the control of the console to the PC to play. In these cases, you should check that the adapter is in good condition.

seek professional help

If the above suggestions have not been enough, you will have to seek professional help. Many times, taking the remote to a technician is the most convenient, it is even a cheaper option. Controllers are expensive, so you have to do what you can to keep it in good condition.

If he ps4 controller not charging after using the above techniques, you may need to change the battery. As we have already mentioned, the most appropriate thing is that you seek the professional help of a technician. In this way, you will not have any inconvenience in your control that harms it.

But if you have knowledge in electronics, you can well assert them to solve the situation. At this very moment, we are going to give you some basic tips to change the battery of your PlayStation controller. As a result, you’ll be playing for hours and hours without the need to buy a new controller.

Step one

Start by removing the screws on the back of the controller using a quality screwdriver. It is important that you keep them in a safe area so that you do not lose them, since they are of a specific size. Otherwise, when you go to reassemble the remote it will not fit correctly.

step two

Insert a plastic lockpicking tool into the slots on the remote this time. Apply a little pressure to uncouple the two areas, being very careful not to break anything. Repeat the process on the other side of the controller until the area is free.

Step three

This step is the same as the previous one, but in the upper part of the command. You must be more careful, since this is the touch part and we do not want you to damage any component. Especially pay attention to the cable that is connected to the bottom plate of the device.

After this, you will have three small pieces, which are the options button and two trigger springs. As with the screws, you have to keep them in a safe place.

Step four

Carefully disconnect the cable that is connected between the directional, touch and analog buttons. Separate the two pieces of the remote, so that the front casing is uncovered.

step five

Here you are going to visualize the battery and at the same time two cables, one being red and the other black. These are what connect the battery to the board using a connector. To disconnect everything, you just have to gently turn sideways and a little upwards.

step six

Once you’ve disconnected the battery, you simply need to replace it with another one. Later, put everything in its place and you will have the command fully operational again. With this, you will have solved the problem of ps4 controller not charging.

If he ps4 controller not charging For battery reason, you have to buy one of excellent quality. There are devices that even have a capacity of 2000 mAh, so you can enjoy many more hours of play. The wireless experience is spectacular in video game consoles.

Finally, all that remains is to take care of the controller and its battery, connecting it only when necessary. If you put these suggestions into practice, success will be guaranteed.

Now that we have taught you how to replace the battery, it is also important that you learn how to buy the ideal one. If he ps4 controller not charging, the problem is probably in your battery. But if you buy one that is not of quality, you will have this problem frequently.

For this reason, we have prepared a brief list that will help you choose the most suitable battery for your controller. As a consequence, you will enjoy hours of autonomy without any mishap. Without further ado, we leave this top, which will surely be useful for you.

ostentatious

It is a lithium ion battery that has a capacity of 1,000 mAh that helps extend the use time of your controller. In addition, it works for both the normal and Slim versions, just like the Pro. It is specifically designed to incorporate the console controller in an optimal and completely safe way.

patona

It has exactly the same capacity as in the previous case and is also compatible only with the console controller. It is a certified quality product that includes electronic security protections. In addition, it charges quickly and consumes very little.

The brand is characterized by designing and manufacturing batteries following European quality standards.

Elec Gear 1X

If the ps4 control does not charge, and you need to change the battery, this is one of the best options. First of all, its great autonomy stands out, since it has a capacity of nothing more and nothing less than 1,500 mAh. It consists of half more than what the original battery of the console offers.

As in the previous cases, it complies with European manufacturing standards and incorporates electronic protection.

Cellonic

Its main quality is its great capacity, which although it is lower than in the previous case, it has about 1,300 mAh. We are talking about a lithium ion cell battery, ideal for Pro and Slim consoles. At the same time, it is high-capacity, with a long enough life to guarantee hours of play.

On the other hand, it integrates protection against short circuits, overvoltage and overheating. As a consequence, it is unlikely that it will be damaged and you will have to search again for a replacement battery. Finally, we emphasize that each high-quality cubicle is individually tested before installation.

If you want to read more articles similar to PS4 controller does not charge or turn on: tricks and how to fix itwe recommend that you enter our Consoles category.