Hunter Fan Remote 99600 Not Working: How to Fix It

If your Hunter Fan Remote 99600 not working, you are not alone. Many people have reported this problem. Fortunately, it is usually easy to fix. In this article, we will walk you through the steps that you need to take to get your remote working again.

There are a few things that prevent your Hunter Fan Remote 99600 from working. This is caused by one of two things: a bad remote or a bad receiver.

hunter fan remote 99600 not working

In this article, we will provide some troubleshooting steps to try and fix the problem. We will also provide a link to the Hunter Fan Remote 99600 manual, in case those steps don’t work for you. Hopefully, with a little bit of effort, you will be able to get your fan remote up and running again!

What is Hunter Fan Remote 99600?

Hunter Fan Remote 99600 is designed to work with the Hunter Fan Receiver Model 59244 (for fans with light kits) or the Hunter Fan Receiver Model 27185 (for fans without light kits). The remote allows you to control the fan’s speed, as well as turn it on and off.

hunter 99600 ceiling fan remote not working

The remote is a handy tool to have, but if it isn’t working properly, you can get frustrated by it quickly. If your Hunter Fan Remote Receiver is not working, follow these steps to try and fix the problem. You can also check the insignia tv remote not working here.

Why Is My Hunter Fan Remote 99600 Not Working?

This problem is caused by either a bad remote or a bad receiver. Sometimes, the problem is obvious (such as when you drop your remote and it stops working).

Other times, the problem is less obvious. If your remote suddenly stops working and you don’t know why follow the steps that we have provided to fix the problem.

How to Fix Hunter Fan Remote Not Working?

Follow these steps if your Hunter Fan Remote 99600 not working, Try These Steps as mentioned. Also, check the sony tv remote not working here.

Check Batteries

Make sure that the batteries in your remote are fresh. Make sure you have inserted the batteries correctly, with the correct polarity (+ and -).

Replace Receiver

If your batteries are good and you still can’t get your fan to work, it might be time to replace the receiver. You can buy a new receiver at any home improvement store.

Replace Remote

If your batteries are good and you still can’t get your fan to work, it might be time to replace the remote. You can buy a new remote at any home improvement store.

Check the Buttons

Sometimes, the buttons on a remote can get stuck. If this is the case, you might be able to fix the problem by gently pressing down on each button until it pops back up.

Clean Remote

If none of these steps work, your remote may just need a good cleaning. Gently wipe it down with a soft cloth.

Check Infrared Receiver

If you are still having problems, it could be that the infrared receiver on your fan is not working. If this is the case, you will need to call a professional for help. They can replace the receiver or repair it so that it works again.

Check Wiring

There may be something wrong with the wiring in your home. If this is the case, you will need to call a professional for help. They can replace the receiver or repair it so that it works again.

Reset The Remote Control

If all else fails, you can reset the remote. Hold down the “On” button for five seconds and then press “Off.” This will reset your fan to factory settings. You may need to do this process more than once for it to work properly again.

Conclusion

In conclusion, if your hunter Fan Remote 99600 not working, try the above-mentioned troubleshooting Methods and fix it. Hope this article was helpful! If you are still having problems, it is best to call a professional. They can replace the receiver or fix it. Do Visit Techy2tech.com for useful information.

Leave a Comment