how to control samsung soundbar with tv remote


How do I sync my Samsung soundbar to my TV remote?

Control your soundbar using your Samsung TV remote Use the TV remote to navigate to Settings, select Sound, and then select Sound Output on your Samsung TV. Select your Samsung soundbar, and then select Close. Now you can use your TV remote to adjust volume and mute the soundbar.

How do I get my TV remote to control my soundbar?

How to Control a Soundbar With a TV Remote Find the optical or HDMI ARC connection on both the soundbar and TV. Connect an optical or HDMI cable to each. Turn the TV and soundbar on. Test and Troubleshoot Any Connection Issues. Adjust and Optimize Your Sound.

Why won’t my Samsung remote control my soundbar?

If the Samsung Soundbar Remote is Not Working, you must first discharge its battery. Now hold any button on the remote for at least 30 to 40 sec. Doing this process will drain the extra charge in the circuit. Now put the battery back in the remote and check if your remote works.

Why does my Samsung sound bar not turn on with TV?

Solution: On the Samsung tv, choose «TV» as Source – a blue checkmark appears showing that the current source is tv. Now use tv as normal and soundbar turns on with tv. This fixed the problem immediately. Hello !

How do I adjust the volume on my Samsung soundbar?

Sound volume To adjust the volume for a speaker, press LEVEL on the remote. Select a speaker by pressing the Left or Right button on the remote. Adjust the volume of a speaker by pressing the Up or Down button on the remote.

What is ARC in HDMI?

The Audio Return Channel (ARC) connects your TV and audio system with a single High Speed HDMI® cable and eliminates the need for an additional composite audio or optical cable.

How do I pair my Samsung sound bar?

Set the soundbar to Bluetooth pairing mode. Repeatedly press Source on the remote or soundbar until the soundbar’s display reads BT > WAIT > BT PAIRING. If the soundbar displays BT READY, press and hold Source on the soundbar until BT PAIRING displays.

Does HDMI ARC turn on soundbar?

Using Anynet+ and ARC Connect an HDMI cable from the HDMI OUT port on your soundbar to your TV’s HDMI (ARC) port. Set the soundbar to D.IN mode by pressing Source on the remote or soundbar. After about 2 seconds, the source will automatically change to TV ARC.

How do I reset my Samsung sound bar?

Reset the soundbar by powering it off and then pressing and holding the Play/Pause button until it displays ‘INIT OK’. Power on the soundbar, and then try pairing the soundbar to your TV again.

How do I turn my soundbar on without a remote?

The power button is usually embossed and looks like this icon . If there are more than one button present in the bottom right side corner of the soundbar and the manual is not available, try pushing all the buttons one at a time. The button that will make the LED lights blink is the power button.

Can I use my Sony TV remote to control my Samsung soundbar?

1-2 of 2 Answers If your soundbar has an HDMI port with ARC feature, then yes. Mine is Samsung (model HWJ6000) and works great on my Sony remote control.

Can my LG TV remote control my soundbar?

Your LG Sound Bar is equipped with SIMPLINK technology that allows some of its functions to be controlled by your TV’s remote control when connected via HDMI. Some of the controllable functions include powering your Sound Bar on/off and controlling the volume.

How do I connect my Samsung soundbar to my LG TV?

Connect your soundbar with HDMI ARC To set up HDMI ARC, power on your TV and soundbar. Next, connect one end of an HDMI cable into the HDMI IN (ARC) port on your TV. Connect the other end into the HDMI OUT (TV-ARC) port on your soundbar. Next, change the source on your soundbar to the D.IN.

Why doesn’t my soundbar turn on when I turn on the TV?

The soundbar doesn’t output the TV sound or doesn’t turn on when the TV is turned on. This happens when Control for HDMI function of the soundbar is off. Enable the Control for HDMI function to resolve the issue. On the remote control, press and hold the VOICE button for five seconds.

Should I connect my soundbar with HDMI or optical?

To begin with, HDMI ARC is the best choice if you want the absolute best audio quality possible. It supports all the latest audio formats, and lets you use the same remote for all devices. Moreover, it helps you eliminate tangled cables and clutter. On the other hand, optical cables still offer decent sound quality.

Why is my soundbar not working with my TV?

If you’re using an analog connection, make sure the TV volume is turned up. If the TV’s analog audio output is set to “variable” and you’re getting no sound from the soundbar, try turning the TV’s volume up. If the TV is turned down all the way, you’ll hear no sound even if the soundbar is set to full volume.

Is it OK to leave soundbar on all the time?

Can you leave a soundbar on all the time? Just like any other speaker, you can damage your soundbar if you leave it on all the time. It can get overheated, pose a fire hazard, and unnecessarily use up energy.

What does no arc mean on Samsung soundbar?

If you have no audio when using ARC, press the Anynet button on your soundbar’s remote once and then twice to toggle the Anynet function on or off. Anynet must be set to ON for ARC to work. The TV audio settings must be set to external speaker to receive audio through the soundbar.

Should TV volume be on with soundbar?

A Your TV speakers should be turned all the way down or off when you use a separate sound system such as a soundbar. Using them with the soundbar may cause echoes and the TV speakers do nothing to improve the sound. Look at your TV’s audio menu. If you can, turn the TV speakers off completely at the menu.

How do I increase the volume on my sound bar?

Use your TV remote to navigate to “Settings.” Under Settings, select “Sound” and then “Sound Output” on your Samsung TV. Your Samsung soundbar will now be showing as one of the options. Select it and adjust the volume with your TV remote.

Should I use HDMI or HDMI ARC?

While a regular HDMI connector is only able to transmit video images, ARC has an added function that allows you to transmit audio from a TV back to the source, like a receiver or soundbar. This means you only require 1 cable in order to transmit both video and audio signals.

Do I need a special HDMI cable for ARC?

Using HDMI ARC does not require a new HDMI cable. Any HDMI cable should be able to cope with the requirements – it’s only when we move on to eARC this could (potentially) become an issue.

How do I know if my HDMI cable is ARC?

Can you use ARC? Check the HDMI connections on the back of your TV, soundbar, or receiver. If the HDMI port has ARC, it should be marked as such. Both your TV and the soundbar or receiver must have ARC for it to work.

How do I get my TV to recognize my sound bar?

Make sure that the setting for Control for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Make sure that the ARC feature of your audio device is set to ON or AUTO. Make sure that your audio device is set to the TV input. Change the TV audio output setting to PCM and check whether the sound is output.

What is better arc or optical?

HDMI ARC or digital optical audio? HDMI ARC is a better option. It supports Dolby Digital Plus, Dolby Atmos, and up to 7.1 channels of uncompressed audio while Digital Optical only supports Dolby Digital and up to 5.1 channels of uncompressed audio.

Leave a Comment