Contents
How do I get my TV to play sound through my sound bar?
To set up HDMI ARC, power on your TV and soundbar. Next, connect one end of an HDMI cable into the HDMI IN (ARC) port on your TV. Connect the other end into the HDMI OUT (TV-ARC) port on your soundbar. Next, change the source on your soundbar to the D.IN.
Why wont my Sony soundbar connect to my TV?
While your TV and audio device (Sound Bar, Home Theater System, or Home Audio System) are off, verify that the cables between the TV and Audio device are securely connected. NOTE: Disconnect the HDMI cables, then reconnect them again. Make sure that your TV has an ARC or eARC/ARC label on the HDMI jack.
How do I connect my Sony sound bar?
For details, refer to the Help Guide (Web manual). Set the TV to pairing mode. Press the HOME button on the remote control, select Settings ― Bluetooth setting ― Add device, and press the Enter button. … Pair the soundbar with the TV. Set the soundbar in pairing mode and the TV within 1 meter of each other.
How do I connect my Sony soundbar to my TV without HDMI?
To connect with a coaxial cable, plug the coaxial cable into the VCR or DVD player’s output and the TV’s input. Then, connect the audio output (usually RCA jacks) to the soundbar. The VCR or DVD player will likely have coaxial and RCA inputs.
Why is my TV not playing sound through my soundbar?
While the TV and audio device (Soundbar, Home Theater System) are turned off, disconnect the cables, and then reconnect them. Make sure that the cables between the TV and the audio device are securely connected. Make sure that you make the appropriate connection based on the model of the TV and the audio device.
Why won’t my TV pick up my soundbar?
Reset the soundbar by powering it off and then pressing and holding the Play/Pause button until it displays ‘INIT OK’. Power on the soundbar, and then try pairing the soundbar to your TV again.
What is the best way to connect a soundbar to a TV?
The best way to connect your soundbar to your TV is with an HDMI cable. This is because HDMI transfers audio digitally, which means it will be raw and uncompressed. Also, HDMI cables can handle the most high-end soundbars, including ones that support surround sound.
How do I pair my soundbar to my Smart TV?
Follow the steps below to connect your soundbar to the TV. Prepare an HDMI cable. Connect the cable to the TV’s HDMI IN (ARC). Connect to the HDMI OUT (TV-ARC) port of the soundbar. Turn on the soundbar and set the Source to D.IN. The TV sound will be played through your soundbar.
How do you reset a Sony soundbar?
How to reset the Soundbar On the unit, press and hold the + (volume up) button, (power) button, and (input select) button for more than five seconds to reset the system. Unplug the AC power cord. Plug the AC power cord back in, and press the (power) button to turn on the unit.
Is it better to connect soundbar with HDMI or optical?
The biggest difference is that HDMI can pass higher-resolution audio, including the formats found on Blu-ray: Dolby TrueHD and DTS HD Master Audio. These formats can’t get transmitted across optical. In terms of simplicity, HDMI also passes video signals.
Do I need an HDMI cable for my soundbar?
You’ll get the best sound quality via an HDMI cable. Most soundbars and TVs have an HDMI port. Keep in mind you need to use an HDMI ARC or eARC cable and port. If you don’t have this, you’ll need an optical cable in addition to an HDMI cable.
Can I use a soundbar without HDMI ARC?
When you connect an external device to TV (without ARC) and Sound Bar, connect the HDMI cable (sold separately) from the external device to the TV. Then, connect the external device to the Sound bar using an optical cord (sold separately). If you want to connect to just the TV, then the HDMI connection is unnecessary.
How do I connect my soundbar to my TV without ARC or optical?
In case of no HDMI audio return channel, then the next best thing to do is connect your TV to the soundbar using Bluetooth. Make sure that your TV has a bluetooth transmitter, then pair the TV with the soundbar. If your TV doesn’t support bluetooth, then the next best option is to use a digital optical cable.
How do I get my soundbar to work?
Can’t hear TV sound from the soundbar, home theater system, or home audio system Perform a power reset or restart of the TV. … Turn off your audio system and the TV, disconnect the cables between your TV and the audio system, and reconnect them. … Verify that the audio output setting of your TV is set to the audio device.
How do I get sound from both TV and soundbar?
Most modern TVs will allow you to either silence your built-in speakers or disable them entirely. You then switch your sound output through your TV’s audio set up menu to “External” to relay signals directly to the soundbar itself.
How do I reset my soundbar?
Press and hold the (power) and – (volume down) buttons on the Soundbar for more than five seconds. Unplug the AC power cord. Plug the AC power cord back in, and press the (power) button to turn on the unit.
Why is my soundbar not working with HDMI?
Double-check that everything is connected and especially when using HDMI check sources; go to Inputs, and check that the TV’s eARC/ARC port connects to the HDMI output (it should be marked ARC too, as above) of your soundbar.
Will soundbars work with any TV?
You can use any soundbar on any TV in general. However, to guarantee that two devices will work well together, you need to be sure they have compatible connections.
Can all TVs Use a soundbar?
However, you can technically pair a sound bar with just about any size TV. So when it comes to size, use your discretion. Just make sure your TV has the right connectivity to hook up your new sound bar, especially if your TV is 8 years or older.
What is difference between HDMI and HDMI ARC?
ARC is short for Audio Return Channel. This is a technology that’s used for some HDMI connectors and most HDMI 2.0b cables. While a regular HDMI connector is only able to transmit video images, ARC has an added function that allows you to transmit audio from a TV back to the source, like a receiver or soundbar.
How do I sync my Sony soundbar with my TV remote?
Using the TV remote control, turn on the TV. On the Sound Bar remote control, press the (power) button to turn on the Sound Bar. On the bar speaker, press and hold the BLUETOOTH button, and on the Sound Bar remote control, press the TV button simultaneously for 5 seconds.
For a factory reset, you need to locate the “Off” button on the control panel. Turn off your soundbar before you hold down the “Off” button for however long it takes for the soundbar to display “INIT OK”. After you see it on your soundbar, you can turn your device back on and try to pair it again with your TV.
How do I test my Sony sound bar?
Select Audio Settings. Select Speaker Settings. Select Test Tone and set it to On. NOTE: Once this setting is enabled, the test tone is emitted from each speaker in sequence while adjusting the level.
Why is my Sony sound bar flashing blue?
When a product has a flashing blue LED, this indicates that it is in Bluetooth Pairing mode. Go to your Bluetooth settings in your smartphone / tablet and select the model number from the list. Your device will now pair.
Why is my sound bar not working with optical cable?
Make sure the home theater or stereo system is set to the appropriate input and mode for the optical connection. Make sure the optical cable is firmly connected to both the TV and the home theater or stereo system. Try changing the channel on the TV to another digital broadcast.
Do I need both HDMI ARC and optical?
Soundbars with Digital Optical Audio and HDMI ARC In short, if you have HDMI ARC on both your TV and soundbar, then use HDMI ARC. If you don’t have HDMI ARC, then use digital optical. Most soundbars support less than 5.1 channels of audio, so in terms of audio quality, there isn’t really a difference.
Can I use both HDMI and optical on soundbar?
You will be able to insert both – optical and HDMI cord and have the audio and video signals coming through both of them.
Can you plug a soundbar into any HDMI?
You must have HDMI ARC or (High Definition Multimedia Interface Audio Return Channel) to connect the soundbar to your TV, as a simple TV HDMI port is just for ‘input’ and does not support ARC.
Which HDMI port is for soundbar?
If your TV has an HDMI eARC port, that’s the one to go for when it comes to making the connection, otherwise, any spare HDMI port will do. Once you’ve connected the soundbar to the TV, ensure the cables are firmly in place.
How do I know if I have an ARC HDMI cable?
To determine if your TV supports HDMI ARC, you can look at the HDMI ports on the back of the TV. If an HDMI connector is labeled with “HDMI ARC” or “ARC,” the TV supports it. Additionally, if your TV was made after 2009, it’s likely that it will have HDMI ARC.
What happens if I don’t have an ARC HDMI?
If you TV does not have ARC port then you will have to use optical, as normal HDMI port does not support both way data transfer for audio to go out of it.
What does ARC mean in HDMI?
Audio Return Channel The Audio Return Channel (ARC) connects your TV and audio system with a single High Speed HDMI® cable and eliminates the need for an additional composite audio or optical cable.
What if my TV doesn’t have an HDMI ARC port?
If the TV has no ARC label on its HDMI ports, connect the HDMI cable to any HDMI ports on the TV and to the HDMI OUT (ARC) on the home theatre system or home audio system. Then connect an optical cable to the optical output port of the TV and the DIGITAL IN (TV) port on the home theatre system or home audio system.
Why do I need HDMI ARC for soundbar?
HDMI ARC is designed to reduce the number of cables between your TV and an external Home Theatre System or Soundbar. The audio signal is capable of traveling both ways to and from the speakers, which will improve the sound quality and latency of the signal.
Does every TV have HDMI ARC?
*Note: Most TVs only have one HDMI ARC or eARC port. If you don’t see the letters “ARC” or “eARC” on the TV’s HDMI ports, then it’s likely that your TV does not support ARC or eARC functionality. You can also refer to your TV’s owner’s manual or visist their support website for more information.
Does HDMI ARC turn on soundbar?
To summarize, HDMI ARC works with soundbars by allowing a return channel through the Television, which minimizes cables and simplifies the remote control situation. If you want a simple setup with easy sound management HDMI ARC, or the more advanced HDMI eARC standard, are spec.